Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and operation of the car

Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
+ Forward and back bridges, running gear and steering
- Body
   Care of a body
   Removal of spots of various origin from a vinyl upholstery and panels of finishing of salon
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Replacement of a windshield and the fixed windowpanes
   Service of forward doors
   Service of back doors
   Removal and installation of a cowl
   Service of doors of a back of models Hardtop and Station Wagon
   Service of a door of a back of models of Utiliti (Van) (Utility)
   Removal and installation of a front grille
   Removal and installation of the central console
   Removal and installation of front seats
   Removal and installation of a back seat
   Service of seat belts
   Removal and installation of the dashboard
+ Onboard electric equipment

Removal and installation of a cowl



  1. Lift a cowl and record it an emphasis.
  2. Cover mudguards of both wings with special covers or just old blankets for protection of a paint and varnish covering. Pay special attention to protection of the sites located under corners of a cowl.
  1. Disconnect a hose of supply of liquid of washing of a windshield from hoses on a cowl (see an accompanying illustration).
  1. Marker lead round plates of loops, having marked their arrangement on a cowl.
  2. Give bolts of fastening of plates of loops to a cowl, remove washers. By means of the assistant remove a cowl from the car.



  1. By means of the assistant install a cowl on the car, having recorded it in front an emphasis.
  2. Screw fastening bolts to a cowl of plates of loops (do not forget to establish washers under their heads). Level loops according to the landing tags put in the course of dismantle, only after it you can strongly tighten bolts.
  3. Ask the assistant to hold the cowl lock in open situation a driving cable, close a cowl.
  4. Check correctness of an arrangement of side edges of a cowl in relation to wings of the car and the rear edge in relation to the body panel.
  5. In case of need adjustments weaken bolts of fastening of loops to a cowl and as appropriate correct the provision of a cowl.
  6. Check serviceability of functioning of the lock of a cowl. At a lock otpuskaniye the cowl has to rise slightly breakthrough, allowing to reach fingers a latch clamp.
  7. For adjustment of the lock weaken fixing bolts (see an accompanying illustration) and shift the lock in the required direction. Tighten bolts.
1 — the lock
2 — bolts