Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and operation of the car

Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Cooling systems, heating and air conditioning
+ A power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
- Coupling
   Service of assembly of coupling and mechanism of switching off of coupling
   Service of the main cylinder
   Service of the executive cylinder
   Service of the servo-driver
   Service of a pedal of coupling
   Pumping of hydraulic system
   Coupling adjustments
+ Brake system
+ Forward and back bridges, running gear and steering
+ Body
+ Onboard electric equipment

Service of a pedal of coupling

Removal and installation


Coupling pedal components

1 — an axial bolt
2 — the plug
3 — a pedal
4 — the coupling
5 — a washer
6 — a returnable spring
7 — a nut


  1. In interior of the car disconnect a pusher from a coupling pedal.
  2. Give a nut on an axial bolt of a pedal, remove a washer.
  3. Try to remember the adjusting provision of a returnable spring, remove an axial bolt and take a coupling pedal from the car.
  4. Remove from a pedal of the plug and the coupling.


Installation is made upside-down.


  1. Check a condition of plugs and the coupling, in case of need make replacement.
  2. Before installation moderately grease a fixing finger and an axial bolt a disulfide - molybdenum lubricant on a lithium basis.
  3. Establish a returnable spring in former situation.
  4. Tighten a nut of an axial bolt with the required effort.
  5. Execute adjustment of height of situation and free wheeling of a pedal of coupling.